Installation

EXTERIOR: NAME PLATE:

COMPONENTS





INSTALLATION

HINT: When installing the name plate, heat the vehicle body and name plate using a heat light.

Heating temperature:





NOTE: Do not heat the vehicle body and name plate excessively.

1. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the name plate. (If reusing the name plate)
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
(c) Install the name plate.





(1) Using a heat light, heat the vehicle body and name plate.
(2) Remove the release paper from the name plate.

HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate.
2. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the name plate. (If reusing the name plate)
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
(c) Install the name plate.
(1) Using a heat light, heat the vehicle body and name plate.
(2) Remove the release paper from the name plate.

HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate.
for SE name plate:





for SLE name plate:





for SPORT name plate:





3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the name plate. (If reusing the name plate)
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
(c) Install the name plate.





(1) Using a heat light, heat the vehicle body and name plate.
(2) Remove the release paper from the name plate.

HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate.