Installation

SEAT: FRONT SEAT ASSEMBLY (for Power Seat):

COMPONENTS









INSTALLATION

1. INSTALL FRONT SEAT ASSEMBLY LH
(a) Place the seat in the cabin.

NOTE: Be careful not to damage the vehicle body.

(b) Connect the connectors under the seat.
(c) Connect the negative battery's terminal.
(d) Tighten the 2 bolts on the front side of the seat.
Torque: 37 Nm (375 kgf-cm, 27 ft-lbf)
(e) Tighten the 2 bolts on the rear side of the seat.
Torque: 37 Nm (375 kgf-cm, 27 ft-lbf)
(f) Install the 2 seat track covers.
(g) Install the headrest.
2. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light. (Service Precautions)

3. INSPECT FUNCTION OF POWER SEAT OPERATION
(a) Inspect the function of power seat operation. (On-Vehicle Inspection)

4. INSPECT SEAT HEATER OPERATION