Installation

3MZ-FE COOLING: RADIATOR:

INSTALLATION

1. INSTALL FAN AND MOTOR
(a) Install the fan to the radiator with the 3 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
2. INSTALL RADIATOR ASSEMBLY
(a) Install the radiator to the body.
(b) Connect the ECT switch No. 1 connector.
(c) Connect the fan motor connector.
3. INSTALL RADIATOR SUPPORT UPPER
(a) Install the radiator support with the 4 bolts.
Torque: 14 Nm (142 kgf-cm, 10 ft-lbf)
(b) Connect the 2 horn connectors.
4. INSTALL AIR CLEANER INLET ASSEMBLY





(a) Install the 2 air cleaner inlets with the 3 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
5. ADJUST HOOD SUB-ASSEMBLY (Adjustments)

6. ADD ENGINE COOLANT (Service and Repair)

7. INSPECT FOR COOLANT LEAK (Service and Repair)