Reassembly

3MZ-FE LUBRICATION: OIL PUMP:

REASSEMBLY

1. INSTALL OIL PUMP ROTOR





(a) Apply a light coat of engine oil to the oil pump gear set and place it into the pump body with the marks facing the pump body cover side.
2. INSTALL OIL PUMP COVER
(a) Install the oil pump cover with the 10 screws.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
3. INSTALL OIL PUMP RELIEF VALVE
(a) Apply a light coat of engine oil to the relief valve, and insert the relief valve and spring into the pump body hole.
(b) Install the plug.
Torque: 49 Nm (500 kgf-cm, 36 ft-lbf)