Camshaft Gear/Sprocket: Specifications

CAMSHAFT SUB GEAR
Align the gear teeth of the main gear and sub gear, and tighten the service bolt.
Torque 5.4 Nm (55 kgf-cm, 48 in-lbf)

CAMSHAFT TIMING GEAR ASSEMBLY
Using a 46 mm socket wrench, install and tighten an oily lock nut by turning it counterclockwise.
Torque 150 Nm (1,530 kgf-cm, 111 ft-lbf)

CAMSHAFT TIMING PULLEY
Using SST, tighten the RH pulley bolt.
Torque 125 Nm (1,275 kgf-cm, 92 ft-lbf)

Using SST, tighten the LH pulley bolt.
Torque 125 Nm (1,275 kgf-cm, 92 ft-lbf)