Installation

3MZ-FE COOLING: WATER PUMP:

INSTALLATION

1. INSTALL WATER PUMP ASSEMBLY
(a) Install a new gasket and the water pump with the 4 bolts and 2 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
2. INSTALL TIMING BELT NO.3 COVER

HINT: (Installation)

3. INSTALL CAMSHAFT TIMING PULLEY (Reassembly)

4. INSTALL NO.2 TIMING BELT IDLER SUB-ASSEMBLY
Torque: 43 Nm (438 kgf-cm, 32 ft-lbf)
5. INSPECT TIMING BELT
6. INSTALL TIMING BELT (Installation)

7. INSTALL TIMING BELT TENSIONER ASSEMBLY (Installation)

8. INSTALL TIMING BELT GUIDE NO.2 (Installation)

9. INSTALL ENGINE MOUNTING BRACKET RH
Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)
10. INSTALL TIMING BELT NO.2 COVER (Installation)

11. INSTALL TIMING BELT NO.1 COVER (Installation)

12. INSTALL CRANKSHAFT PULLEY (Installation)

13. INSTALL GENERATOR BRACKET NO.2
Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)
14. INSTALL ENGINE MOUNTING STAY NO.2 RH (Installation)

15. INSTALL ENGINE MOVING CONTROL ROD (Installation)

16. INSTALL VANE PUMP V BELT (Installation)

17. INSTALL V BELT NO.1 (Installation)

18. INSPECT DRIVE BELT TENSION (Engine)

19. ADD ENGINE COOLANT (Service and Repair)

20. INSPECT FOR COOLANT LEAK (Service and Repair)

21. INSTALL FRONT WHEEL RH