Installation

LIGHTING: HEADLIGHT ASSEMBLY:

INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY
(a) Connect the connectors.





(b) Install the headlight assembly with the 2 bolts, screw and clip.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. INSTALL FRONT BUMPER ASSEMBLY (Installation)

3. INSTALL FRONT FENDER LINER LH (Installation)

4. INSTALL FRONT FENDER LINER RH (Installation)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight)
6. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT (Adjustments)

7. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) (Adjustments)

8. PREPARATION FOR HEADLIGHT AIMING (Using a Screen) (Adjustments)

9. HEADLIGHT AIMING INSPECTION (Adjustments)

10. HEADLIGHT AIMING ADJUSTMENT (Adjustments)

11. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (Adjustments)

12. PREPARATION FOR FOG LIGHT AIMING (Adjustments)

13. FOG LIGHT AIMING INSPECTION (Adjustments)

14. FOG LIGHT AIMING ADJUSTMENT (Adjustments)

15. PERFORM INITIALIZATION (for HID Headlight)

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (Repair Instruction - Initialization).