Removal

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY:

REMOVAL

HINT: Installation is in the reverse order of removal.

1. REMOVE REAR FLOOR FINISH PLATE
2. REMOVE LICENSE PLATE LIGHT ASSEMBLY





(a) Disconnect the connector and grommet.





(b) Using a screwdriver, disconnect the 2 license plate light assembly.

HINT: Tape the screwdriver tip before use.

3. REMOVE LICENSE PLATE LIGHT LENS





(a) Remove the 2 license plate light lenses as shown in the illustration.
4. REMOVE LICENSE PLATE LIGHT BULB
(a) Remove the 2 license plate light bulbs.
5. REMOVE LICENSE PLATE LIGHT SOCKET AND WIRE