Reassembly

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY:

REASSEMBLY

1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE





(a) Connect the connector.
(b) Engage the claw and install the rear combination light socket and wire.
2. INSTALL REAR COMBINATION LIGHT BULB
(a) Install the rear combination light bulb to the rear combination light socket and wire.





(b) Turn the rear combination light bulb and rear combination light socket and wire in the direction indicated by the arrow and install them as a unit.
3. INSTALL REAR COMBINATION LIGHT GASKET





(a) Install a new rear combination light gasket.

- Be sure to remove all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.