Installation

AXLE: REAR AXLE HUB BOLT:

INSTALLATION

1. INSTALL REAR AXLE LH HUB BOLT





(a) Install a washer and nut to a new front axle LH hub bolt as shown in the illustration.
(b) Using a hammer, handle or an equivalent to hold the hub & bearing assembly, install a new rear axle LH hub bolt by tightening the nut.
2. INSTALL REAR DISC
3. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH
4. INSTALL REAR WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)