Installation

3MZ-FE EMISSION CONTROL: CANISTER:

INSTALLATION

1. INSTALL CHARCOAL CANISTER ASSEMBLY





(a) Install the 2 bolts, clip and charcoal canister.
Torque: 39 Nm (398 kgf-cm, 29 ft-lbf)
(b) Connect the purge line hose to the charcoal canister.
(c) Connect the wire harness clamp.
(d) Connect the vapor pressure sensor connector.





(e) Connect the charcoal canister filter sub-assembly to the charcoal canister.





(f) Connect the fuel tank vent hose to the charcoal canister.
2. INSTALL FUEL TANK ASSEMBLY

HINT: (Components)