Installation

STEERING PAD SWITCH:

INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY





(a) Engage the 2 pins and install the steering pad switch assembly.
(b) Install the screw and engage the clamp.
Torque: 2.4 Nm (24 kgf-cm, 21 in-lbf)





(c) Engage the 2 pins and install the steering pad switch assembly.
(d) Install the screw and engage the clamp.
Torque: 2.4 Nm (24 kgf-cm, 21 in-lbf)
(e) Connect the connector to the spiral cable.
2. INSTALL STEERING PAD (Installation)

3. INSTALL NO. 3 LOWER STEERING WHEEL COVER (Installation)

4. INSTALL NO. 2 LOWER STEERING WHEEL COVER (Installation)

5. CONNECT BATTERY NEGATIVE TERMINAL

HINT: (Service Precautions)

6. PERFORM INITIALIZATION

HINT: (Repair Instruction - Initialization)

7. INSPECT STEERING PAD (Installation)

8. INSPECT SRS WARNING LIGHT

HINT: (Diagnosis System)