Removal

3MZ-FE FUEL: FUEL SENDER GAUGE ASSEMBLY:

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE (Service Precautions)
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Coupe) (Removal)

4. REMOVE REAR SEAT CUSHION ASSEMBLY (for Convertible) (Removal)

5. REMOVE REAR FLOOR SERVICE HOLE COVER (Removal)

6. SEPARATE FUEL PUMP TUBE SUB-ASSEMBLY (Removal)

7. REMOVE FUEL TANK VENT TUBE SET PLATE (Removal)

8. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE (Removal)

9. REMOVE FUEL SENDER GAUGE ASSEMBLY (Removal)