Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY:

REMOVAL

HINT: Installation is in the reverse order of removal.

1. DISCONNECT BATTERY NEGATIVE TERMINAL

HINT: (Service Precautions)

2. REMOVE FRONT DOOR SCUFF PLATE LH

HINT: (Removal)

3. REMOVE FRONT DOOR SCUFF PLATE RH

HINT: (Removal)

4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

HINT: (Removal)

5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT: (Removal)

6. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH

HINT: (Removal)

7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

HINT: (Removal)

8. REMOVE CONSOLE BOX CARPET
9. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY

HINT: (Removal)

10. REMOVE REAR CONSOLE BOX ASSEMBLY

HINT: (Removal)

11. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER

HINT: (Removal)

12. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1

HINT: (Removal)

13. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH

HINT: (Removal)

14. REMOVE CONSOLE BOX FRONT

HINT: (Removal)

15. REMOVE AIR DUCT REAR NO.1

HINT: (Removal)

16. REMOVE AIR DUCT REAR NO.2

HINT: (Removal)

17. REMOVE CENTER AIRBAG SENSOR ASSEMBLY





(a) Disconnect the holder (with connectors) from the center airbag sensor assembly.
(b) Remove the 3 bolts and the center airbag sensor assembly.