Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:

REMOVAL

1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

2. REMOVE FRONT DOOR SCUFF PLATE LH (for Coupe) (Removal)

3. REMOVE FRONT DOOR SCUFF PLATE LH (for Convertible) (Removal)

4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for Coupe) (Removal)

5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for Convertible) (Removal)

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (Removal)

7. REMOVE TIRE PRESSURE WARNING RESET SWITCH





(a) Disengage the 2 claws and remove the tire pressure warning reset switch from the lower instrument panel sub-assembly.