Oil Pan, Engine

OIL PAN SUB-ASSEMBLY





NOTICE:
- Remove any oil from the contact surface.
- Apply seal packing to the outer side of the bolt holes in the region "X".
- Apply seal packing to the inner side of the bolt holes in the region "Y".
- Install the oil pan within 3 minutes after applying seal packing.
- Do not expose the seal to engine oil for at least 2 hours after installing the oil pan.

Install the oil pan No. 1 by tightening the oil pan's 17 bolts and 2 nuts uniformly.
10 mm head - Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
12 mm head - Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
14 mm head - Torque: 37 Nm (379 kgf-cm, 27 ft-lbf)