Disassembly

3MZ-FE STARTING: STARTER:

DISASSEMBLY

1. REMOVE MAGNETIC SWITCH ASSEMBLY





(a) Remove the nut and disconnect the lead wire from the magnetic switch.





(b) Remove the 2 screws holding the magnetic switch to the starter drive housing.
(c) Remove the magnetic switch.
(d) Remove the return spring and plunger from starter drive housing.
2. REMOVE STARTER FIELD FRAME ASSEMBLY





(a) Remove the 2 though-bolts, and pull out the field frame together with the commutator end frame.





(b) Remove the field frame from the commutator end frame.
3. REMOVE STARTER ARMATURE PLATE





(a) Remove the armature plate from the field frame.
4. REMOVE STARTER COMMUTATOR END FRAME COVER





(a) Using a screwdriver, pry out the commutator end frame cover.
5. REMOVE STARTER ARMATURE ASSEMBLY





(a) Using snap ring pliers, remove the snap ring and plate washer.
(b) Remove the armature from the commutator end frame.
6. REMOVE PLANETARY GEAR





(a) Remove the 3 planetary gears from the starter drive housing.