Removal

3MZ-FE STARTING: STARTER:

REMOVAL

NOTE: Before changing the starter, check these items again:

- Connector connection
- Accessory installation

1. REMOVE BATTERY
2. REMOVE BATTERY TRAY
3. REMOVE AIR CLEANER INLET ASSEMBLY





(a) Disconnect the VSV connector.
(b) Remove the 2 wire harness clamps.
(c) Remove the vacuum hoses from the hose clamp.
(d) Remove the 2 bolts and air cleaner inlet.
4. REMOVE AIR CLEANER ASSEMBLY





(a) Disconnect the MAF meter connector.
(b) Disconnect the 4 vacuum hoses.
(c) Loosen the 2 air cleaner cap bolts.
(d) Loosen the air cleaner hose clamp bolt and remove the air cleaner cap.
(e) Remove the air cleaner filter element.





(f) Remove the wire harness from the 2 wire harness clamps.
(g) Disconnect the vacuum hose.
(h) Remove the 3 bolts and air cleaner case.
5. REMOVE AIR CLEANER BRACKET





(a) Remove the 2 bolts and air cleaner bracket.
6. REMOVE AIR CLEANER INLET NO.1





(a) Remove the bolt and cleaner inlet.
7. REMOVE STARTER ASSEMBLY





(a) Disconnect the starter connector.
(b) Open the terminal cap, and remove the nut and disconnect the starter wire.
(c) Remove the 2 bolts and starter.