Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RESET SWITCH





(a) Engage the 2 claws to install the tire pressure warning reset switch to the lower instrument panel sub-assembly LH.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH
3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for Coupe)
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for Convertible)
5. INSTALL FRONT DOOR SCUFF PLATE LH (for Coupe)
6. INSTALL FRONT DOOR SCUFF PLATE LH (for Convertible)
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

8. INSPECT TIRE PRESSURE WARNING SYSTEM

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (Test Mode Procedure).