Installation

SUSPENSION: FRONT SUSPENSION LOWER NO. 1 ARM:

INSTALLATION

1. INSTALL FRONT SUSPENSION NO.1 LOWER ARM SUB-ASSEMBLY
(a) Install the front lower arm bush stopper to the front suspension arm sub-assembly lower No. 1 LH.





(b) Install the 2 bolts on the front side of the front suspension arm sub-assembly lower No. 1 LH.
Torque: 200 Nm (2,040 kgf-cm, 148 ft-lbf)





(c) Install the bolt and nut on the rear side of the front suspension arm sub-assembly lower No. 1 LH.
Torque: 206 Nm (2,100 kgf-cm, 152 ft-lbf)
2. INSTALL TRANSVERSE ENGINE MOUNTING INSULATOR (AUTOMATIC TRANSAXLE)





(a) Install the transverse engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft-lbf)
3. INSTALL TRANSVERSE ENGINE MOUNTING INSULATOR (MANUAL TRANSAXLE)
(a) Install the bracket to the manual transmission with the 4 bolts.
Torque: 64 Nm (653 kgf-cm, 47 ft-lbf)
(b) Install the transverse engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft-lbf)
4. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (2AZ-FE ENGINE TYPE)

HINT: (Installation)

5. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (3MZ-FE ENGINE TYPE)

HINT: (Installation)