Removal

SUSPENSION: FRONT SUSPENSION LOWER NO. 1 ARM:

REMOVAL

HINT:
- COMPONENTS: ([1][2]Diagrams)
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (3MZ-FE ENGINE TYPE)

HINT: (Removal)

2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (2AZ-FE ENGINE TYPE)

HINT: (Removal)

3. REMOVE TRANSVERSE ENGINE MOUNTING INSULATOR (AUTOMATIC TRANSAXLE)





(a) Remove the 3 nuts and transverse engine mounting insulator.
4. REMOVE TRANSVERSE ENGINE MOUNTING INSULATOR (MANUAL TRANSAXLE)
(a) Remove the 3 nuts and transverse engine mounting insulator.
(b) Remove the 4 bolts and bracket from the manual transmission.
5. REMOVE FRONT SUSPENSION NO.1 LOWER ARM SUB-ASSEMBLY





(a) Remove the 2 bolts on the front side of the front suspension arm sub-assembly lower No. 1 LH.





(b) Remove the bolt and nut on the rear side of the front suspension arm sub-assembly lower No. 1 LH.
(c) Remove the front suspension arm sub-assembly lower No. 1 LH.
(d) Remove the front lower arm bush stopper from the front suspension arm sub-assembly lower No. 1 LH.