Removal

SUSPENSION: REAR NO. 2 LOWER SUSPENSION ARM:

REMOVAL

HINT:
- COMPONENTS: ([1][2]Diagrams)
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE REAR WHEEL
2. REMOVE CENTER EXHAUST PIPE ASSEMBLY
(a) 2AZ-FE engine: (Removal)

(b) 3MZ-FE engine: (Removal)

3. REMOVE STABILIZER BAR REAR (Removal)

4. SEPARATE REAR STRUT ROD ASSEMBLY (Removal)

5. SEPARATE NO.1 REAR SUSPENSION ARM ASSEMBLY LH (Removal)

6. SEPARATE NO.1 REAR SUSPENSION ARM ASSEMBLY RH

HINT: Separate the RH side using the same procedure as for the LH side.

7. SEPARATE NO.2 REAR SUSPENSION ARM ASSEMBLY LH (Removal)

8. SEPARATE NO.2 REAR SUSPENSION ARM ASSEMBLY RH

HINT: Separate the RH side using the same procedure as for the LH side.

9. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY (Removal)

10. REMOVE NO.2 REAR SUSPENSION ARM ASSEMBLY LH





(a) Remove the bolt, and disconnect the rear suspension arm No.2 (inner side).