Removal

SUSPENSION: FRONT STABILIZER BAR:

REMOVAL

HINT: COMPONENTS: ([1][2]Diagrams)

1. REMOVE FRONT WHEEL
2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH





(a) Remove the 2 nuts and front stabilizer link assembly LH.

HINT: Use a hexagon wrench (6 mm) to hold the stud if the ball joint turns together with the nut.

3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT: Remove the RH side following the same procedure as the LH side.

4. REMOVE FRONT STABILIZER BRACKET NO.1 LH





(a) Remove the 2 bolts and stabilizer brackets No. 1 LH.
5. REMOVE FRONT STABILIZER BRACKET NO.1 RH

HINT: Remove the RH side following the same procedure as the LH side.

6. DISCONNECT TIE ROD ASSEMBLY LH (Removal)

7. DISCONNECT TIE ROD ASSEMBLY RH

HINT: Disconnect the RH side following the same procedure as the LH side.

SST: 09628-62011
8. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY (Removal)

9. DISCONNECT STEERING GEAR OUTLET RETURN TUBE (Removal)

10. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (Removal)

11. REMOVE RACK & PINION POWER STEERING GEAR ASSEMBLY (Removal)

12. REMOVE FRONT STABILIZER BAR BUSH NO.1
(a) Remove the 2 bushes from the stabilizer.
13. REMOVE STABILIZER BAR FRONT
(a) Remove the stabilizer bar front from the vehicle.