Disassembly

U151E AUTOMATIC TRANSAXLE: FLOOR SHIFT ASSEMBLY:

DISASSEMBLY

1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
HINT: (Removal).

2. REMOVE REAR CONSOLE BOX ASSEMBLY
HINT: (Removal).

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
HINT: (Removal).

4. REMOVE FRONT DOOR SCUFF PLATE LH
HINT: (Removal).

5. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: (Removal).

6. REMOVE COWL SIDE TRIM LH SUB-ASSEMBLY
HINT: (Removal).

7. REMOVE COWL SIDE TRIM RH SUB-ASSEMBLY
HINT: (Removal).

8. REMOVE INSTRUMENT PANEL NO.1 UNDER COVER SUB-ASSEMBLY
HINT: (Removal).

9. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH
HINT: (Removal).

10. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH
HINT: (Removal).

11. REMOVE CONSOLE BOX FRONT
HINT: (Removal).

12. REMOVE CONSOLE BOX MOUNTING BRACKET NO.1
13. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Disconnect the transmission control cable assembly from the transmission floor shift assembly.
14. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Disconnect the shift lock control computer connector.
(b) Shift lever with multi-mode automatic transmission:
(1) Disconnect the transmission control switch connector.

(a) Remove the shift lever knob sub-assembly.
16. REMOVE SHIFT LOCK RELEASE BUTTON COVER

(a) Using a small screwdriver, remove the shift lock release button cover from the position indicator housing assembly.
17. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

(a) Using a screwdriver, remove the position indicator housing from the shift lever assembly.
18. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

(a) Remove the connector from the transmission floor shift assembly.
(b) Using a screwdriver, release the stopper of the connector.
(c) Remove the position indicator lamp bulb from the indicator lamp wire.

(d) Using a small screwdriver, disengage the locking lug of terminals (4) and (8), and pull the terminals out from the rear.