Reassembly

U151E AUTOMATIC TRANSAXLE: FLOOR SHIFT ASSEMBLY:

REASSEMBLY

1. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Connect the 2 terminals of the indicator light wire harness to the transmission control switch connector.
(b) Install the position indicator light bulb to the indicator light wire.





(c) Connect the connector to the transmission floor shift assembly.
2. INSTALL POSITION INDICATOR HOUSING ASSEMBLY





(a) Install the position indicator housing to the transmission floor shift assembly.

HINT: Securely engage the claws.

3. INSTALL SHIFT LOCK RELEASE BUTTON COVER





(a) Install the shift lock release button cover to the position indicator housing assembly.
4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY





(a) Install the shift lever knob sub-assembly.
5. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY





(a) Install the transmission floor shift assembly with the 4 nuts.
Torque: 12 Nm (122 kgf-cm, 9 in-lbf)

HINT: Tighten them in order: A, B, C and D.

NOTE: Be careful not to put the wires of the indicator light of the shift lock system between the floor shift assembly and the floor while installing the transmission floor shift assembly.





(b) Connect the shift lock control computer connector.
(c) Shift lever with multi-mode automatic transmission:
(1) Connect the transmission control switch connector.
6. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY





(a) Connect the transmission control cable assembly to the transmission floor shift assembly.

- Install it with the uneven surface facing up.
- Securely engage the claws.

7. INSPECT SHIFT LEVER POSITION
HINT: (Testing and Inspection).

8. ADJUST SHIFT LEVER POSITION
HINT: (Adjustments).