Installation

WIPER AND WASHER: FRONT WIPER MOTOR:

INSTALLATION

1. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY





(a) Install the windshield wiper motor assembly with the 3 bolts.
Torque: 5.4 Nm (55 kgf-cm, 47 in-lbf)
(b) Apply MP grease to the crank arm pivot of the windshield wiper motor assembly.
(c) Install the rod to the windshield wiper motor assembly.
2. INSTALL WINDSHIELD WIPER MOTOR AND LINK





(a) Install the windshield wiper motor and link assembly with the 4 bolts.
Torque: 7.0 Nm (71 kgf-cm, 62 in-lbf)
(b) Connect the connector.
3. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH
(a) Operate the wiper, and stop the windshield wiper motor assembly in the automatic stop position.





(b) Clean the wiper arm serrations.
(c) Clean the wiper pivot serration with a wire brush.





(d) Install the FR wiper arm and blade assembly RH with a nut in the position shown in the illustration.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)

HINT: Hold the arm hinge by hand to fasten the nut.

4. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH





(a) Clean the wiper arm serrations.
(b) Clean the wiper pivot serration with a wire brush.





(c) Install the FR wiper arm and blade assembly LH with the nut in the position as shown in the illustration.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)

HINT: Hold the arm hinge by hand to fasten the nut.