Repair Procedure

1. Insulate the upper cowl attachment locations.





A. Cut 0.5 mm thick felt from the Interior noise kit to dimensions of 25 mm x 30 mm.





B. Apply 0.5 mm felt around the 5 indicated attachment locations along the upper cowl.

^ Apply the felt to the upper cowl with the felt folded along the 30 mm side.

^ Yaris Hatchback shown. Yaris Sedan is similar.

(Sedan only)

2. Insulate Combination Meter and Cluster Cover.





A. Cut 2 pieces of 0.5 mm thick felt in the shape shown.





B. Peel oft the 2 factory white felts located on the top of meter cluster.





C. Apply the felt by starting at the base of the backside of the tab and fully wrap the front portion of the tab.





D. Cut 2 pieces of 1.0mm thick felt in the shape shown.





E. Apply the felt to the backside of the cluster finish panel at location shown.





3. Assemble components in reverse order of removal.

4. Test drive vehicle to verify repair.