Removal

METER: COMBINATION METER (for Sedan):

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER





(a) Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH





(a) Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH





(a) Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end RH.
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL





(a) Disengage the 7 claws and 5 clips and remove the instrument cluster finish panel.
6. REMOVE COMBINATION METER ASSEMBLY





(a) Disconnect the 2 connectors.
(b) Remove the 2 screws and pull the combination meter rearward to remove it.