Reassembly

1NZ-FE FUEL PUMP:

REASSEMBLY

1. INSTALL FUEL PUMP
(a) Apply gasoline to a new O-ring, and then install it into the fuel filter.
NOTICE: Do not disassemble the fuel pump or the suction filter because they are nonreusable parts.





(b) Connect the fuel pump harness.
2. INSTALL FUEL PUMP FILTER






(a) Engage the 5 claws of the fuel pump.
- Do not remove the suction filter.
- Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.





(b) Engage the 2 claws of the fuel suction support.






(c) Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.






(d) Connect the fuel pump filter hose.






(e) Connect the connector of the fuel pump harness.
3. INSTALL FUEL SENDER GAUGE ASSEMBLY






(a) Install the fuel sender gauge by sliding it downward.






(b) Connect the connector of the fuel sender gauge.