Installation

1NZ-FE ENGINE CONTROL SYSTEM: ECM:

INSTALLATION

1. INSTALL ECM BRACKET NO. 2
(a) Install ECM bracket No. 2 with the 2 screws.

2. INSTALL ECM BRACKET
(a) Install the ECM bracket with the 2 screws.
3. INSTALL ECM

(a) Install the ECM with the bolt and 2 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the 2 ECM connectors.

(c) Install the 2 lock knobs and harness clamp.
4. INSTALL COWL TOP PANEL OUTER (for Hatchback) Installation

5. INSTALL COWL TOP PANEL OUTER (for Sedan)

(a) Install the cowl top panel outer and install the 8 bolts.
Torque: 6.5 Nm (66 kgf-cm, 58 in-lbf)

(b) Install the cowl top panel outer center bracket and install the 2 bolts.
Torque: 6.5 Nm (66 kgf-cm, 58 in-lbf)

(a) Install the front air shutter seal and engage the 3 claws.
7. INSTALL COWL TO REGISTER DUCT SUB-ASSEMBLY NO. 2 (for Hatchback) Installation

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK (for Hatchback)

9. INSTALL WINDSHIELD WIPER MOTOR AND LINK (for Sedan)

10. INSTALL COWL TOP VENTILATOR LOUVER LH (for Hatchback)

11. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Hatchback)

12. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Sedan)

13. INSTALL HOOD TO COWL TOP SEAL (for Hatchback)

14. INSTALL COWL SIDE VENTILATOR SUB-ASSEMBLY LH (for Sedan)

15. INSTALL COWL SIDE VENTILATOR SUB-ASSEMBLY RH (for Sedan)

16. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (for Hatchback)

17. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (for Sedan)

18. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (for Hatchback)

19. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (for Sedan)

20. INSTALL FRONT WIPER ARM HEAD CAP (for Hatchback)

21. INSTALL FRONT WIPER ARM HEAD CAP (for Sedan)

22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)