Camshaft Bearing
CAMSHAFTExamine the front marks and numbers on camshaft bearing cap No. 2 and check that the sequence is as shown in the illustration. Then uniformly tighten the bolts, in several steps, in the sequence shown in the illustration.
Torque: 13 Nm (129 kgf-cm, 9.4 ft-lbf)
NOTE: Tighten each bolt uniformly while keeping the camshaft level.
NO. 2 CAMSHAFT
Examine the front marks and numbers on camshaft bearing caps No. 1 and No. 2 and check that the sequence is as shown in the illustration. Then uniformly tighten the bolts, in several steps, in the sequence shown in the illustration.
- for bearing cap No. 2 - Torque: 13 Nm (129 kgf-cm, 9.4 ft-lbf)
- for bearing cap No. 1 - Torque: 23 Nm (235 kgf-cm, 17 ft-lbf)
NOTE: Tighten each bolt uniformly while keeping the camshaft level.
sing a wrench, hold the hexagonal lobe of camshaft No. 2 and install the flange bolt.
SST: 09023-38400
Torque: 64 Nm (653 kgf-cm, 47 ft-lbf)