Removal

POWER STEERING: POWER STEERING ECU (for Sedan):

REMOVAL
HINT: Use the same procedure for both the RH and LH sides.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(a) Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER Removal

3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

5. REMOVE INSTRUMENT CLUSTER FINISH PANEL Removal

6. REMOVE COMBINATION METER ASSEMBLY Removal

7. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
(a) Separate the front door opening trim weatherstrip.
8. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
(a) Separate the front door opening trim weatherstrip.
9. REMOVE FRONT PILLAR GARNISH RH Removal

10. REMOVE FRONT PILLAR GARNISH LH Removal

11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

12. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal

13. REMOVE POWER STEERING ECU

(a) Separate the wire harness clamp.

(b) Disconnect the 4 connectors.