C2176

TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: C2176/76: Receiver Error

DTC C2176/76 - Receiver Error

DESCRIPTION

When the tire pressure warning ECU is detected to internal data error, DTC C2176/76 is stored.





INSPECTION PROCEDURE

NOTICE:
- When replacing the tire pressure warning ECU, read the transmitter IDs stored in the old ECU using the Techstream and note them down before removal.
- It is necessary to perform the initialization Initialization after the registration Registration of the transmitter IDs into the tire pressure warning ECU if the ECU and/or one of the valve and transmitters have been replaced.

PROCEDURE

1. CHECK DTC OUTPUT (C2176/76)
(a) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.
(b) Turn the ignition switch off.
(c) Turn the ignition switch on (IG) and check for DTCs Reading and Clearing Diagnostic Trouble Codes.
OK:
DTC C2176/76 is not output.

NG -- REPLACE TIRE PRESSURE WARNING ECU
OK -- END