Rear Door Speaker

AUDIO / VISUAL: REAR DOOR SPEAKER: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT REAR SPEAKER

HINT: Remove interior parts so that the rear speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the rear speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the rear speaker.
(c) Speaker resistance check
(1) Disconnect the rear speaker connector.
(2) Measure the resistance between the terminals of the speaker.
Standard resistance:
9 Speaker System: 3.2 to 4.8 Ohms
12 Speaker System: 1.8 to 2.6 Ohms
If the result is not as specified, replace the rear speaker.
2. INSPECT STEREO COMPONENT SPEAKER

HINT: Remove interior parts so that the stereo component speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the stereo component speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the stereo component speaker.