Intake Manifold: Specifications

INTAKE MANIFOLD





Install and tighten the 6 bolts and 4 nuts uniformly in several steps.

Torque 21 Nm (214 kgf-cm, 15 ft-lbf)

INTAKE AIR SURGE TANK

NOTE: Do not apply oil to the bolts as listed below:









(a) Install a new gasket to the intake air surge tank.
(b) Using a 5 mm hexagon socket wrench, install the 4 bolts. (*1)
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
(c) Install the intake air surge tank with the 2 nuts and 2 bolts. (*2)
Nut - Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)
Bolt - Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)

THROTTLE BODY





Install the throttle w/ motor body assembly and wire harness clamp stay to the intake air surge tank with the 4 bolts.

Torque 10 Nm (102 kgf-cm, 7 ft-lbf)