Removal

2GR-FE ENGINE MECHANICAL: ENGINE REAR OIL SEAL: REMOVAL

REMOVAL

1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY Removal
2. REMOVE DRIVE PLATE AND RING GEAR OR FLYWHEEL





(a) Using SST, hold the crankshaft.
SST: 09213-70011
09213-70020
SST: 09330-00021





(b) Remove the 8 bolts, front spacer, drive plate and rear spacer.
3. REMOVE ENGINE REAR OIL SEAL





(a) Using a knife, cut off the oil seal lip.
(b) Using a screwdriver, pry out the oil seal.

NOTE: Be careful not to damage the crankshaft. Tape the screwdriver tip before use.