Maintenance Required Lamp/Indicator: Service and Repair

Oil Change Reset Procedure

Step 1. Switch display to the odometer.

Step 2. Turn the "ENGINE START STOP" switch or the engine switch OFF.

Step 3. Vehicles with the smart key system: While pressing the trip meter reset button, turn the "ENGINE START STOP" switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays 000000.

Vehicles without the smart key system: While pressing the trip meter reset button, turn the engine switch to the "ON" position. Continue to press and hold the button until the trip meter displays 000000.


Navigation Maintenance Item Data (If equipped)

This system has a function which informs you of the time to replace certain parts or components as well as other information shown on the screen. When the system begins operating after reaching either the information items date or driving distance, the "information" screen will be displayed.

To avoid seeing the "information" screen again, touch the "Do not display this message again" switch.

Setting Maintenance Information

1. Push the "INFO" button to display the "Information Menu" screen, and then touch the "Maintenance" switch.

2. Touch your desired icon and input the conditions.

Date: Input the next maintenance date.

Distance: Input the driving distance until the next maintenance check. You can input up to five digits for the driving distance.

When you touch the "!" switch on the screen, the screen changes to display the "Change name" screen. Touch the keys to input your desired name and then input the conditions.


After you input the information, touch the "OK" switch. The screen returns to the "Maintenance" screen. The icon color will change to green after the date and driving distance are input. The icon color will change to orange when your vehicle needs to be serviced. The following switches appear on the "Maintenance" screen.

1. Delete all: Cancel all conditions which have been input.

2. Reset all: Reset all items which satisfy either condition.

Touch the "OFF" switch on the "Maintenance" screen, and the "Information" screen will no longer be displayed.

Note:

- For scheduled maintenance information, please refer to the Scheduled maintenance guide or Owners manual supplement.

- Depending on your driving or the road conditions, the system may have a time-lag between the data which has been input and the actual date and driving distance.