Removal

2GR-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: REMOVAL

REMOVAL

1. PREVENT GASOLINE FROM SPILLING OUT
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. DRAIN ENGINE COOLANT Service and Repair
4. REMOVE WINDSHIELD WIPER MOTOR & LINK ASSEMBLY Removal
5. REMOVE COWL TOP PANEL OUTER Removal
6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal
8. REMOVE INTAKE AIR SURGE TANK Removal
9. REMOVE INTAKE MANIFOLD
10. REMOVE KNOCK CONTROL SENSOR





(a) Disconnect the 2 knock control sensor connectors.
(b) Remove the 2 bolts and 2 knock control sensors.