Removal

CRUISE CONTROL: DISTANCE CONTROL ECU: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working Service Precautions.

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1 Removal
3. REMOVE INSTRUMENT PANEL FINISH PLATE Removal
4. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY Removal
5. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH Removal
6. REMOVE INSTRUMENT PANEL AIRBAG ASSEMBLY LOWER NO. 1 Removal
7. REMOVE DISTANCE CONTROL ECU ASSEMBLY





(a) Disconnect the connector.
(b) Remove the bolt and the distance control ECU assembly.