Installation

U660E AUTOMATIC TRANSAXLE: TRANSMISSION CONTROL CABLE ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Put in the transmission control cable assembly to the body.





(b) Turn over the carpet and install the No. 2 shift cable grommet retainer with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)





(c) Install the transmission control cable assembly as shown in the illustration.

HINT:
- Install it with the protrusion facing up.
- Securely engage the claws.





(d) Install the transmission control cable assembly to the control shaft lever with the nut.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)





(e) Connect the transmission control cable assembly with a new clip to the No. 1 transmission control cable bracket.
2. INSTALL NO. 1 AIR CLEANER INLET Installation
3. INSTALL AIR CLEANER CASE Installation
4. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE Installation
5. INSTALL NO. 2 AIR CLEANER INLET Installation
6. INSTALL COOL AIR INTAKE DUCT SEAL Installation
7. INSTALL CENTER AIR BAG SENSOR ASSEMBLY Installation
8. INSTALL AIR CONDITIONING UNIT

HINT: Installation.

9. INSPECT SHIFT LEVER POSITION Adjustments
10. ADJUST SHIFT LEVER POSITION Adjustments