Removal

BRAKE: BRAKE PEDAL: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE LH Removal
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal
5. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY Removal
6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Smart Key System) Removal
7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/ Smart Key System) Removal
8. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1 Removal
9. REMOVE COMBINATION METER ASSEMBLY Removal
10. REMOVE BRAKE BOOSTER ASSEMBLY
HINT: Refer to the procedures up to "REMOVE BRAKE BOOSTER". Removal

11. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

(a) Disconnect the stop light switch connector and disengage the 2 clamps.

(b) Remove 2 bolts (A), bolt (B) and the No. 1 brake pedal support plate.