Installation

2AZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY





(a) Apply a light coat of engine oil to an O-ring of the camshaft timing oil control valve assembly sensor.





(b) Install the camshaft timing oil control valve assembly with the bolt.
Torque: 9.0 Nm (92 kgf-cm, 80in-lbf)
(c) Connect the camshaft timing oil control valve assembly connector.
2. INSTALL CLIP NUT





(a) Install the clip nut.
3. INSTALL VACUUM HOSE CLAMP





(a) Install the vacuum hose clamp with the bolt.
Torque: 5.0 Nm (51 kgf-cm, 44in-lbf)
4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Removal