Flywheel/Flexplate

FLYWHEEL





Install the flywheel with the 8 bolts. Uniformly tighten the 8 bolts in the sequence shown in the illustration.

Torque 130 Nm (1,330 kgf-cm, 96 ft-lbf)

DRIVE PLATE





Install the front spacer, drive plate and rear spacer with the 8 bolts. Using several steps, uniformly tighten the 8 bolts in the sequence shown in the illustration.

Torque 98 Nm (1,000 kgf-cm, 72 ft-lbf)