Crankshaft, Engine

Crankshaft timing sprocket:
Minimum sprocket diameter (with chain) 51.6 mm (2.031 in.)

Standard thrust clearance 0.040 to 0.240 mm (0.0016 to 0.0095 in.)
Maximum thrust clearance 0.30 mm (0.0118 in.)

Thrust washer thickness 1.930 to 1.980 mm (0.0760 to 0.0780 in.)

Main journal diameter 54.988 to 55.000 mm (2.1648 to 2.1654 in.)

Main journal diameter (Reference)
Mark 0 54.999 to 55.000 mm (2.1653 to 2.1654 in.)
Mark 1 54.997 to 54.998 mm (2.1652 to 2.1653 in.)
Mark 2 54.995 to 54.996 mm (2.1652 to 2.1652 in.)
Mark 3 54.993 to 54.994 mm (2.1651 to 2.1651 in.)
Mark 4 54.991 to 54.992 mm (2.1650 to 2.1650 in.)
Mark 5 54.988 to 54.990 mm (2.1649 to 2.1650 in.)

Maximum crank pin taper and out-of round 0.003 mm (0.0001 in.)

Crank pin diameter 47.990 to 48.000 mm (1.8894 to 1.8898 in.)

Standard oil clearance 0.017 to 0.040 mm (0.0007 to 0.0016 in.)
Maximum oil clearance 0.060 mm (0.0024 in.)