Wheels and Tires

SERVICE SPECIFICATIONS: TIRE AND WHEEL: SERVICE DATA

SERVICE DATA

Cold tire inflation pressure:

for TMC Made 2AZ-FE engine models:





When driving under the above vehicle conditions at sustained high speeds above 160 km/h (100 mph), in countries where such speeds are permitted by-law, inflate the front and rear tires to 240 kPa (2.4 kgf*cm2, 35 psi) provided that it does not exceed the maximum cold tire inflation pressure molded on the tire sidewall.
Cold tire inflation pressure:

for TMC Made 2GR-FE engine models:





When driving under the above vehicle conditions at sustained high speeds above 160 km/h (100 mph), in countries where such speeds are permitted by-law, inflate the front and rear tires to 240 kPa (2.4 kgf*cm2, 35 psi) provided that it does not exceed the maximum cold tire inflation pressure molded on the tire sidewall.
Cold tire inflation pressure:

for TMMK Made 2AZ-FE engine models:





When driving under the above vehicle conditions at sustained high speeds above 160 km/h (100 mph), in countries where such speeds are permitted by-law, inflate the front and rear tires to 240 kPa (2.4 kgf*cm2, 35 psi) provided that it does not exceed the maximum cold tire inflation pressure molded on the tire sidewall.
Cold tire inflation pressure:

for TMMK Made 2GR-FE engine models:





When driving under the above vehicle conditions at sustained high speeds above 160 km/h (100 mph), in countries where such speeds are permitted by-law, inflate the front and rear tires to 240 kPa (2.4 kgf*cm2, 35 psi) provided that it does not exceed the maximum cold tire inflation pressure molded on the tire sidewall.