Removal

U250E AUTOMATIC TRANSAXLE: TRANSMISSION CONTROL CABLE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE AIR CONDITIONING UNIT
HINT: Removal.

2. REMOVE BATTERY Removal
3. REMOVE AIR CLEANER INLET ASSEMBLY Removal
4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
6. DISCONNECT NO. 2 SHIFT CABLE GROMMET RETAINER





(a) Disconnect the transmission control cable assembly from the transmission floor shift assembly while pushing the 2 claws of the floor shift cable.
(b) Turn back the carpet.





(c) Remove the 2 bolts and disconnect the No. 2 shift cable grommet retainer.
(d) Remove the No. 2 shift cable grommet retainer.
7. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY





(a) Remove the nut from the control shaft lever.
(b) Disconnect the transmission control cable assembly from the control shaft lever.





(c) Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.





(d) Disconnect the transmission control cable assembly from the control cable clamp.
(e) Pull out the transmission control cable assembly from the body.