Removal

U250E AUTOMATIC TRANSAXLE: SHIFT LEVER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE LH Removal
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMC Made) Removal
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMMK Made) Removal
6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal
7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY





(a) Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.
8. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal
9. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal
10. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Removal
11. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY Removal
12. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMC Made) Removal
13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMMK Made) Removal
14. REMOVE CONSOLE BOX POCKET Removal
15. REMOVE CONSOLE BOX CARPET Removal
16. REMOVE CONSOLE BOX ASSEMBLY (for TMC Made) Removal
17. REMOVE CONSOLE BOX ASSEMBLY (for TMMK Made) Removal
18. REMOVE NO. 2 CONSOLE BOX INSERT FRONT (for TMC Made) Removal
19. REMOVE NO. 2 CONSOLE BOX INSERT FRONT (for TMMK Made) Removal
20. REMOVE FLOOR CARPET BRACKET LH Removal
21. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Disconnect the end of the transmission control cable assembly from the shift lock control unit.





(b) Disconnect the transmission control cable assembly from the shift lock control unit.
22. REMOVE SHIFT LOCK CONTROL UNIT





(a) Disconnect the shift lock control ECU connector and transmission control switch wire connector.





(b) Remove the 4 bolts and shift lever.