Transmission Speed Sensor: Testing and Inspection

U250E AUTOMATIC TRANSAXLE: SPEED SENSOR: INSPECTION

INSPECTION

1. INSPECT SPEED SENSOR (NT SENSOR)





(a) Disconnect the speed sensor connector from the transaxle.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:






If the resistance value is not as specified, replace the speed sensor.
2. INSPECT SPEED SENSOR (NC SENSOR)





(a) Disconnect the speed sensor connector from the transaxle.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:






If the resistance value is not as specified, replace the speed sensor.