Installation

NAVIGATION: MULTI-DISPLAY: INSTALLATION

INSTALLATION

1. INSTALL NAVIGATION RECEIVER ASSEMBLY





(a) Install the navigation receiver assembly as shown in the illustration.
2. INSTALL RADIO NO. 2 BRACKET





(a) Install the radio No. 2 bracket with the 5 bolts.
3. INSTALL RADIO NO. 1 BRACKET





(a) Install the radio No. 1 bracket with the 5 bolts.
4. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY
(a) Connect each connector.





(b) Engage the 4 clips.
(c) Install the navigation receiver with heater control panel assembly with the 4 bolts.
5. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for TMC Made) Installation
6. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for TMMK Made) Installation
7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMC Made) Installation
8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMMK Made) Installation
9. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for TMC Made) Installation
10. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for TMMK Made) Installation
11. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for TMC Made) Installation
12. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for TMMK Made) Installation
13. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMC Made) Installation
14. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMMK Made) Installation
15. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMC Made) Installation
16. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMMK Made) Installation
17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for TMC Made) Installation
18. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for TMMK Made) Installation
19. INSERT MAP DISC