Removal

NAVIGATION: MULTI-DISPLAY: REMOVAL

REMOVAL

1. EJECT MAP DISC
(a) Turn the power switch on (ACC).
(b) Push the "CLOSE" button.
(c) Touch "MAP EJECT" on the navigation screen to eject the map disc.
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for TMC Made) Removal
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for TMMK Made) Removal
4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMC Made) Removal
5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMMK Made) Removal
6. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMC Made) Removal
7. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for TMMK Made) Removal
8. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for TMC Made) Removal
9. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for TMMK Made) Removal
10. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for TMC Made) Removal
11. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for TMMK Made) Removal
12. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMC Made) Removal
13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMMK Made) Removal
14. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for TMC Made) Removal
15. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for TMMK Made) Removal
16. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY





(a) Remove the 4 bolts.
(b) Pull the navigation receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.
(c) Disconnect each connector and remove the navigation receiver with heater control panel assembly.
17. REMOVE RADIO NO. 1 BRACKET





(a) Remove the 5 bolts and radio No. 1 bracket.
18. REMOVE RADIO NO. 2 BRACKET





(a) Remove the 5 bolts and radio No. 2 bracket.
19. REMOVE NAVIGATION RECEIVER ASSEMBLY





(a) Remove the navigation receiver assembly as shown in the illustration.